Bagby Gage Stick , Inc 
One Piece Gage Sticks

Minimal Order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
Two Section Gage Sticks


Minimal Order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
Three Section Gage Sticks


Minimal order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
Four Section Gage Sticks


Minimal order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
1 Fold/2Piece Gage Sticks
with Locking Joints


Minimal order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
2 Fold/3 Piece Gage Sticks
with Locking Joints


Minimal order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
3 Fold/4 Piece Gage Sticks
with Locking Joints


Minimal order of this type gage stick is 6 units per part number
Items shown in blue can be shipped UPS
55 Gallon Drum Gage Stick


Minimal order of this type gage stick 12 units per part number
Items shown in blue can be shipped UPS
All gage sticks available with these calibrations
Available Gallon Per Inch Calibrations
Gallon per inch calibration in order by capacity




Gallon per inch calibration in order by diameter




Gage Stick Specifications Material: Our gage sticks are manufactured from various kiln dried hardwork. The material used is selected for color, strength and straightness. The size blank used depends on the type gage stick. One pick and sectional gage sticks are 21mm x 21mm. Folding gage sticks are 16mm x 21mm. Drum gage sticks are 16mm x 16mm. These dimensions may vary slightly without prior notice by us. Printing: We print our gage sticks with chemical resistant ink in inches in 1/8" increments with each inch line numbered and in metric in 5mm increments with each centimeter line numbered. Accuracy: Our calibrations have a maximum variation of 1/16" per 8' of calibration. Drum stick claibration are based on standard closed head steel drum where a drum on it's end is full at 32" level and drum on it's side is full at 22"level. Protective Coating: All gage sticks are finished on the printed side(s) with three sprayed coats of clear semigloss catalyzed vinyl material. The unprinted back side is finished with two coats of the same material. The side(s) adjacent to the printed side(s) are roll coated with a dull black urethane material. Compatible with E10, E85 and B6 to B20 fuels. Bottom Tip Protection: The bottom tip of each type gage stick we make, with the exception of drum gage sticks, is shipped with an installed 5/8" diameter polypropylene tip protector.

Items shown in blue can be shipped UPS Gage Stick Discount: Combine quantities for best price Example: 50 of two different units will both be priced at 100 units 12 is minimum order for combination printed and two side reversed printed per part number ordered Terms: Net 30 days Freight: All FOB Pinson, Alabama 35126 We will prepay and add or ship collect via carrier of your choice 
Home  Building Process  Charts  Contact us 